bab288
New member
- Joined
- Aug 30, 2012
- Messages
- 8
- Location
- Central, Ky
- Tractor
- 1969 Ford 3000, 2007 Simplicity Legacy XL 4X4 FEL
Just confirming that #1 cylinder is front of tractor, closet to radiator
whodat526
Veteran Member
yes number 1 is closes to the radiator
Badbrad59
New member
I have a 1966 Ford 3000 and nothing on the instrument cluster works/lights up! Where do I begin?
OP
bab288
New member
- Joined
- Aug 30, 2012
- Messages
- 8
- Location
- Central, Ky
- Tractor
- 1969 Ford 3000, 2007 Simplicity Legacy XL 4X4 FEL
Check the ground to make sure it is tight and has good contact to clean metal. There is a 3 amp fuse between the key switch and the voltage stabilizer. It could also be the voltage stabilizer. Hope this helps
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
deffinately do check the fuse aft of the cluster... post back..
until you do get it fixed, wire a low wattage lamp from switched power to the oil sender.. switch on, lamp on, engine not running.. engine running lamp off, if you have oil pressure.
until you do get it fixed, wire a low wattage lamp from switched power to the oil sender.. switch on, lamp on, engine not running.. engine running lamp off, if you have oil pressure.