Ford 1710 steering shock replacement
- Thread starter MikeDspain
- Start date
- Views: 15496
-
- Tags
- ford 1710
OP
MikeDspain
Member
Guess I forgot to post the pics, sorry.
Part of the shock is still stuck on the stud.
Went to the middle of the front axle.
Part of the shock is still stuck on the stud.
Went to the middle of the front axle.
CalG
Super Member
- Joined
- Sep 29, 2011
- Messages
- 9,003
- Location
- vermont
- Tractor
- Hurlimann 435, Fordson E27n, Bolens HT-23, Kubota B7200, Kubota B2601
though there may be many automotive "shocks" that may bolt up just fine. A steering damper application would very likely be valved for a much slower response time.
You may not notice the missing function of a damper just now, but run one wheel into a tree stump at a glancing angle and then report back.
I've had the wheel of the Fordson (manual steering) jerked around so violently as to sprain a thumb, while working in the woods.
You may not notice the missing function of a damper just now, but run one wheel into a tree stump at a glancing angle and then report back.
I've had the wheel of the Fordson (manual steering) jerked around so violently as to sprain a thumb, while working in the woods.
OP
MikeDspain
Member
That might very well be the reason for it! I believe it does kick out more with it missing than it did when it was hooked up. Thanks sir.
Daddyslack
New member
- Joined
- Oct 1, 2021
- Messages
- 1
- Tractor
- Ford 1910
I know this is old, but I bent my Ford 1910 steering dampener on a stump.
Anyone have a replacement part link?
Ford implement said they no longer carry it, and when they did, it was $240.
Anyone have a replacement part link?
Ford implement said they no longer carry it, and when they did, it was $240.
