sandman2234
Super Member
- Joined
- Dec 4, 2005
- Messages
- 5,853
- Location
- Jacksonville, Florida
- Tractor
- JD2555 and a few Allis Chalmers and now one Kubota
Great information here, but I thought I might add one single thing, not needed by Sld, but maybe for someone in the future.
Be sure when you pull the head off, be sure to notice the orientation of the head! My 1210 came to me used and the head had been removed, and replaced. Unfortunately, it was put back on, turned 180 degrees. It will go on, but the holes that allow fluid flow will not match, thereby keeping the fluid from exiting, and basically making the lift arms frozen in place.
David from jax
Be sure when you pull the head off, be sure to notice the orientation of the head! My 1210 came to me used and the head had been removed, and replaced. Unfortunately, it was put back on, turned 180 degrees. It will go on, but the holes that allow fluid flow will not match, thereby keeping the fluid from exiting, and basically making the lift arms frozen in place.
David from jax