Flow control For Tractor Mounted Log Splitter.

[Utopia Texas]

On a previous Ford tractor I have owned there was a physical notch on the rear hydraulics handle where the lever could be set at a full flow position where one could use the open and close lever on a remote log splitter to actuate the cylinder. My Boomer 50 does not work this way and I have no way to set the lever on the side of the seat full flow to use a log splitter. How does one get around this? If I use a bungie strap to hold the lever open at the tractor seat and then used the lever on the log splitter remotely would this hurt the tractor hydraulics?
Thanks.....

 

[J_J]

No, as the fluid is still flowing back to tank in a series flow.