flat rear tire

[budepps3760]

Yesterday I was bush hogging on a small incline and just about rolled over. The area has a few small mounds and the event just seemed to come out of nowhere. Anyway about 5 minutes later I heard a loud pop and my left rear tire was flat. I could not find a cut in the tire or anything to indicate what caused it to go flat. I noticed a tube inside the rim and so I am wondering if the pressure from rolling towards the left side might have damaged the sidewall or just caused the bead to separate from the rim. Needless to say I am going to buy a tilt-o-meter listed here by one of the vendors.

 

[Gary Fowler]

You likely had a very low pressure in the tire and rolled it off the rim. If it has a tube in it, it likely popped when the bead on the tire broke.
I know the tires on my B26 TLB don't show any squat to them even when they get really low on air. I rolled one off working slowly on an incline once, luckily it didn't damage anything and I managed to get it aired back up but only after I removed it from the tractor. All my tires are tubeless.