Fitting size?

[cntryby]

I have an m7060 I'll be putting a grapple on and need to install a third function valve. I have the hoses, and the $119 northman valve from northern looks like it will work and Hydradine looks like they have the base plate I'll need. Unless ya'll know of a cheaper place, Hydradine is around $85. The electrics I can put together myself. I hope to put the whole thing together under $300 including couplings

Main question is what are the threads for the rest of the loaders valving / hydraulics? I'd like to stay the same. At the valve they look to be a straight thread.

 

[ericm979]

https://www.discounthydraulichose.com/mm5/thread_guide.pdf

I have seen D03 base plates for less than that.

Many of the fittings will be NPT. For example quick connects and valve ports are often NPT.
I suggest using adaptors to go from NPT to JIC and using JIC for as much as you can. It's much easier to deal with.

 

[cntryby]

Appreciate the response.

I know how to identify threads, I just don't want to pull anything apart just to put a thread gauge on it. I just want to keep the threads the same in order to minimize the spares I'll keep in the shop. I didn't see any thread sizes specified in the WSM and thought someone in here may already know the threads so I wouldn't have to pull one off to check.

Partially because I'm lazy, partially because the less you open a hydraulic circuit the better.