project_X
Gold Member
Finally, I\'ve turfs : )
I have a Yanmar 1602D that had AGs, and I wanted to get turfs on it.
Last year I purchased a set of these tires on ebay for the rear. I finally got the adpater plate to convert the bolt patterns from JD to Yanmar. I mounted them last night and re-checked the RCI to verify the required fronts. I found that JD has the fronts for a 4110 (LVA11662)available which will bolt directly on and accept 23-8.5x12 turfs and preserve the require ratio front to rear. I ordered the fronts and will get them on this weekend.
Hope this helps others.
Cheers,
Rob
I have a Yanmar 1602D that had AGs, and I wanted to get turfs on it.
Last year I purchased a set of these tires on ebay for the rear. I finally got the adpater plate to convert the bolt patterns from JD to Yanmar. I mounted them last night and re-checked the RCI to verify the required fronts. I found that JD has the fronts for a 4110 (LVA11662)available which will bolt directly on and accept 23-8.5x12 turfs and preserve the require ratio front to rear. I ordered the fronts and will get them on this weekend.
Hope this helps others.
Cheers,
Rob
