Fall Creek
New member
2008 Kubota 3240 HSTC. How do I check if FEL float detent is working? If it's not working, how do I fix it?
FEL float detent
- Thread starter Fall Creek
- Start date
- Views: 911
K5lwq
Elite Member
- Joined
- Aug 6, 2017
- Messages
- 4,818
- Location
- Mineola, TX
- Tractor
- Kioti LK2554, Branson 4815C, Satoh Beaver, Speedex
Welcome to TBN!
If you push the joystick all the way forward you should feel it go into float and the handle should stay up on it's own. If you pick the front of the tractor up a little with the loader, it should fall if float is working.
If you push the joystick all the way forward you should feel it go into float and the handle should stay up on it's own. If you pick the front of the tractor up a little with the loader, it should fall if float is working.
Thomas
Epic Contributor
- Joined
- Apr 6, 2000
- Messages
- 31,091
- Location
- Lebanon,NH.
- Tractor
- Kubota B2650HSD w/Frontloader & CC LTX1046 & Craftman T2200 lawn mower.
Lower bucket to ground than push joy stick all the way forward than going backwards bucket follow contour of the ground.
9973720wb19
Platinum Member
I'll just add that you might have to do it with a quick pop flick of the wrist. that's how it works in JD. a slow push might not get it into the detent. it just a feel kind of thing.
nybirdman
Super Member
Make sure the bucket is close the ground;a hard straight push forward on the joy stick.
Here you go: Floating The Bucket - YouTube