Fault codes
- Thread starter Normando1
- Start date
- Views: 3139
rScotty
Super Member
- Joined
- Apr 21, 2001
- Messages
- 9,801
- Location
- Rural mountains - Colorado
- Tractor
- Kubota M59, JD530, JD310SG. Restoring Yanmar YM165D
That code is: "Input air temperature reads low."
I believe that this is one of the inputs to your Engine Control Computer (the ECU). It could be a bad temperature sensor or a broken wire between sensor and computer.
But it could also indicate a problem with the computer module itself. ECUs are a known trouble component. The frame mounted ECUs get a lot of engine heat and water & end up leaking or swelling up and breaking their internal printed ciruit.
Non-repairable. Replace with new.
I just had the ECU replaced on our 310SG. My error code was coolant temperature instead of air.
rScotty
I believe that this is one of the inputs to your Engine Control Computer (the ECU). It could be a bad temperature sensor or a broken wire between sensor and computer.
But it could also indicate a problem with the computer module itself. ECUs are a known trouble component. The frame mounted ECUs get a lot of engine heat and water & end up leaking or swelling up and breaking their internal printed ciruit.
Non-repairable. Replace with new.
I just had the ECU replaced on our 310SG. My error code was coolant temperature instead of air.
rScotty
