Chipper Farm Pro Chipper, missing parts?

[Slippy]

I just received my Chinese chipper (Farm Pro). It came with a small plastic box and seal was broken, nothing inside. Can anyone tell me what was suppposed to come with it?
Thanks.

 

[GuglioLS]

Don't you just hate when that happens !!!!!! /forums/images/graemlins/mad.gif

Most likely it was all the metric nuts & bolts to assemble everything together. I have the Jinma 6" chipper & I think its the same as farm pro. I will bet you will be able to use SAE bolts for about 80% of assembly. Maybe a trip to the hardware store for a few metics. It will not be difficult to round up everything you need. BTW - I really like that chipper. Be sure to check and make sure all grease fitting are installed and lubricated as well as making sure all bolts & belts are tight. Pay particular attention to the Pillow Block bearings connected to the main PTO shaft belt drive pully.

 

[Ranch_Hand_Supp]

Don't know how Farm Pro ship's?, The ones I get from the factory come with no parts bag/box. The bolts that are needed to put the rear feed shroud on are in the mounting holes on the chipper.

Check all bolts etc... as mentioned

Here are some pic's to look at that might help you?

http://www.ranchhandsupply.com/pages/32/index.htm

Ronald
Ranch Hand Supply

 

[dty]

Slippy,

the only thing that was in my plastic box was a manual. All the other parts, nuts and bolts are attached to the chipper.

 

[wbonnell]

Slippy

Same with me - there was only a manual with some extra nuts and bolts!!

Bill

 

[Slippy]

Thanks for the replys. All of my hardware, minus a few bolts, were attached to the chipper. Looks like a got everything then. Thanks again.