whiteturbo
New member
I am getting the error 6 message on dash with blinking light i replace the mfwd sensor but didn't help any idea what i should look for?
error 6 3520 Cab Tractor
- Thread starter whiteturbo
- Start date
- Views: 3760
joecdeere
Veteran Member
- Joined
- Apr 13, 2002
- Messages
- 1,729
- Location
- Cumming,Georgia
- Tractor
- 1948 Allis UC Hi-Crop Cane 1941 Allis WC 1948 Allis G with loader, 1948 Allis G with dual disc 1948 Allis G 1948 Allis G 1949 Allis G 1954 Allis G 1959 Ferguson TO-35 1972 MF 135 1979 Power King 2418 1989 Ford 345C TLB
Err 06 MFWD Speed No signal at MFWD
speed input.
No cruise function; Loss
of performance.
Test MFWD sensor. Check that
MFWD is fully engaged. Check
502 Red wire and connections for
short or open circuit.
I have a PDF of the tech manual you're welcome to, shoot me your email if wanted
Joe
speed input.
No cruise function; Loss
of performance.
Test MFWD sensor. Check that
MFWD is fully engaged. Check
502 Red wire and connections for
short or open circuit.
I have a PDF of the tech manual you're welcome to, shoot me your email if wanted
Joe
compact
Silver Member
OP probably snagged a bush on the sensor on the right under the floorboard. Very vulnerable wire.
OP
whiteturbo
New member
I have replaced the sensor and it didn't correct the problem and the wire seems ok. I haven't had the time to trace all the wires down but i do have a mid mount mower and the wire would be hard to get snagged. I had someone send me a manual online but haven't had time to find the problem.
Thanks
