engine won't fire, clueless

[Citydude]

Today, I was in the process of wiring in work lights on the front and rear of the canopy on my L3400. Somewhere along the process, I discovered that the engine won't fire. It turns over great. I checked all the fuses however noticed that before, when I turned the key on there was a distinct "click" and the glow plug indicator was on. Now, no glow plug indicator light comes on and no click. I also noticed that the seat safety switch doesn't click when moved up and down. Would the seat switch cause this? Stumped....

 

[tjferns]

I had the same problem with my bx it happened a couple of different times. Check to make sure that you didnt bump the pto lever and all so the seat switch move it up and down a few times by hand.

 

[Citydude]

I checked the PTO lever and moved the seat switch up and down. Is the seat switch supposed to make a clicking sound? I thought I remembered it did, now it doesn't.

 

[Citydude]

found the issue! I put the fuse in the wrong slot. Sometimes I wonder how I lived this long being such an airhead.....Thanks!

 

[skyhook]

Sounds like you put the fuse in the wrong slot, to me.

 

[square1]

Sounds like you put the fuse in the wrong slot, to me.

Yep, has all the symptoms :yes:

 

[Citydude]

You guys are good! Now where is my tractor? It was here yesterday.....

 

[skyhook]

LOL, I think square1 did it.