Draw bar hardware

   / Draw bar hardware #1  

missesalot

Bronze Member
Joined
Mar 25, 2017
Messages
99
Location
Brockport NY
Tractor
tc45d
I have a 45hp tractor with a drawbar. I would like to add a d-ring or similar to the drawbar. The hole in the drawbar is 1.25" in diameter. All the hardware I've found has either a 3/4" or 7/8" pin size. What am I missing?
 
   / Draw bar hardware
  • Thread Starter
#3  
dang. I even looked first like a good forum citizen. Funny how when you search on 1.25" something different comes up than if you search 1 1/4". Thank you!
 
   / Draw bar hardware #4  
Welcome, we all been there.... and will be again.
 
   / Draw bar hardware #5  
I have a 45hp tractor with a drawbar. I would like to add a d-ring or similar to the drawbar. The hole in the drawbar is 1.25" in diameter. All the hardware I've found has either a 3/4" or 7/8" pin size. What am I missing?
3/4 or 7/8 will have a little slop but won't hurt a thing, most of us use those size pins on the farm.
 

Tractor & Equipment Auctions

2015 LINDE H80D FORKLIFT (A50854)
2015 LINDE H80D...
2018 CATERPILLAR 326FL EXCAVATOR (A51242)
2018 CATERPILLAR...
2017 Ford F-250 4x4 Knapheide Service Truck (A50323)
2017 Ford F-250...
2014 GOOSENECK DRIVER SIMULATOR TRAILER (A50854)
2014 GOOSENECK...
REYNOLDS 100 - 8 YARD PULL TYPE SCRAPER PAN WITH DRAWBAR (A51039)
REYNOLDS 100 - 8...
2008 FORD F750 SUPER DUTY BUCKET UTILITY TRUCK (A50854)
2008 FORD F750...
 
Top