Draw bar hardware

[missesalot]

I have a 45hp tractor with a drawbar. I would like to add a d-ring or similar to the drawbar. The hole in the drawbar is 1.25" in diameter. All the hardware I've found has either a 3/4" or 7/8" pin size. What am I missing?

 

[Eagle1]

Try 1 1/4 shackle - Google Search

but may want a 1 1/8 or smaller to make installation easier.

 

[missesalot]

dang. I even looked first like a good forum citizen. Funny how when you search on 1.25" something different comes up than if you search 1 1/4". Thank you!

 

[Eagle1]

Welcome, we all been there.... and will be again.

 

[Lineman North Florida]

I have a 45hp tractor with a drawbar. I would like to add a d-ring or similar to the drawbar. The hole in the drawbar is 1.25" in diameter. All the hardware I've found has either a 3/4" or 7/8" pin size. What am I missing?

3/4 or 7/8 will have a little slop but won't hurt a thing, most of us use those size pins on the farm.

 

[JCoastie]

twisted clevis is a nice option too, stands out rather than flops down.

Amazon.com