DK 4210 dead...

Northernman · Aug 20, 2022

Hello all, I have a 2020 DK4210 Cab with no power to the instrument cluster, no lights, NOTHING...

Battery is at 12.5 V and I have power to the starter

Does anyone have a checklist ?

claggstractors · Aug 20, 2022

Well, first thing would be to check the fuse goin' to the instrument panel. Check for power on both sides, or if it's the kind with no test spots ohm it out.

Bloodyrun · Aug 20, 2022

check alternator wires, happened to me

Robin Veerman · Aug 20, 2022

Details details….what happened to you? Can you describe what you did to fix the issue? That’s really beneficial to everyone on any forum…

jayncal · Aug 21, 2022

I had the same thing occur on my 2018 CK3510. It ended up being a loose ground on the frame. Check that ground and make sure it’s not loose. Mine was located on the right/front side of the frame, near the starter. Hope you get it running soon.

the5fours · Oct 8, 2022

Northernman said:
Hello all, I have a 2020 DK4210 Cab with no power to the instrument cluster, no lights, NOTHING...

Battery is at 12.5 V and I have power to the starter

Does anyone have a checklist ?

Did you find the problem? Mine was similar- got a code, selinoid would click but battery would be down to 50% or less by next day. The battery voltage was good, but the amps were way low. Replaced the battery and it is working fine (this happened after 1 month of owning) I’m wondering if it is overcharging though as I’m around 14.25 bolts when it’s running?