DIY Rake from older thread

[MyBX25d]

I remember when I first started browsing TBN forums I happened across a picture of someones land rake that they had fabricated using hay rake tines attached to a bar. I have spent a couple hours on the search engine, and browsing related articles. I can't seem to find it again. Does someone remember this thread? Am looking at possibly making a similar piece.

 

[bcp]

Try these:

http://www.tractorbynet.com/forums/build-yourself/112451-good-landscape-rake-cheap.html

http://www.tractorbynet.com/forums/build-yourself/300969-good-landscape-rake-cheap-part.html

http://www.tractorbynet.com/forums/build-yourself/313030-94bullitts-home-built-3-point.html

http://www.tractorbynet.com/forums/...d-rake-home-made-post3843665.html#post3843665

Bruce

 

[HEC]

Thanks bcp great information from those sites .

 

[RobJ]

A rake rake...

http://www.tractorbynet.com/forums/build-yourself/124554-my-rake-build.html

 

[MyBX25d]

Thanks guys! The second link that BCP shared was the one I was thinking of (Daver1963). After looking at Robj's rake I am leaning more towards a build like that, but with a carry-all frame like Daver used. Was surfing Northern tool @ equip when I saw the carry-all frame that lit the light bulb. Am thinking of building a 3sided carry all similar to a actual pallet as the base. That way I can use the frame as light forks, a removable (light) carry-all, and as a rake. Thank you again, I will let you know how it comes along (may be a bit still).