Deere 5500 Clutch Adjustment / Service Manual

[adc8693]

Does anyone have a link for a service manual for a JD 5500? I used to be about to find one free to view with a simple google search. Cannot see to find one now.

Or can anyone tell me how to adjust the clutch? is it just a pedal adjustment? Seems it is occasionally slipping now when letting off the pedal under load. (I know I overheated heated the clutch trying to get my other tractor out of a bad spot, so I know it took some wear)

Thanks for the help.

 

[Zebrafive]

Clutch adjustment depends on which transmission you have.
Collar shift and TSS (same procedure to adjust) OR Reverser different procedure to adjust).
Post your transmission type.

 

[adc8693]

Clutch adjustment depends on which transmission you have.
Collar shift and TSS (same procedure to adjust) OR Reverser different procedure to adjust).
Post your transmission type.

It's the 9 speed synchronized. No reverser. I'm guessing I just shorten the linkage?

 

[Andrew Norris-Green]

Is there a clutch adjustment point on a 5500 john deere tractor transmission

 

[Harry in Ky]

Is there a clutch adjustment point on a 5500 john deere tractor transmission

https://partscatalog.deere.com/jdrc/sidebyside/equipment/56782/referrer/navigation/pgId/2462029

Yes, assuming you have a dry clutch transmission.

 

[Andrew Norris-Green]

https://partscatalog.deere.com/jdrc/sidebyside/equipment/56782/referrer/navigation/pgId/2462029

Yes, assuming you have a dry clutch transmission.

Thankyou I think there is a little plate on the side

 

[Andrew Norris-Green]

It's the 9 speed synchronized. No reverser. I'm guessing I just shorten the linkage?

Thankyou

 

[joecdeere]

Thankyou

Check your messages

 

[Andrew Norris-Green]

Thankyou

Does anyone know how to adjust a clutch in a5500 john deere I think there is a little plate to take of and there is a screw which way to go so hopefully the clutch doesn't slip

 

[Andrew Norris-Green]

Does anyone know how to adjust a clutch in a5500 john deere I think there is a little plate to take of and there is a screw which way to go so hopefully the clutch doesn't slip