Loader Cylinder stopped leaking

   / Cylinder stopped leaking #1  

hawkeye08

Elite Member
Joined
Jul 16, 2010
Messages
3,615
Location
Pacific Northwest
I posted a while back about my curl cylinder leaking and got the information I needed to repair it this winter (don't need another project now). I then read about someone having a leak stop on its own after working the loader a bit. I was cleaning my tractor the other day and noticed that my cylinder had stopped leaking. I guess that solves that... I'll wait until I have a leak again before buying any parts...

Cheers!:thumbsup:
 
   / Cylinder stopped leaking #2  
I posted a while back about my curl cylinder leaking and got the information I needed to repair it this winter (don't need another project now). I then read about someone having a leak stop on its own after working the loader a bit. I was cleaning my tractor the other day and noticed that my cylinder had stopped leaking. I guess that solves that... I'll wait until I have a leak again before buying any parts...

Cheers!:thumbsup:

Maybe something (dirt) was sticking the control valve open a hair?? Who knows but I once had a tire stop leaking all by itself - I guessed the valve had dirt in it and eventually blew out when I inflated it.
 
   / Cylinder stopped leaking #3  
I wish some of my repairs would fix themselves. I usually turn a simple repair into one that is much more complicated than I originally thought. Live and learn.
 
   / Cylinder stopped leaking #4  
My the clog be small..might be good idea change filter before snow piles up.
 
   / Cylinder stopped leaking #6  
I posted a while back about my curl cylinder leaking and got the information I needed to repair it this winter (don't need another project now). I then read about someone having a leak stop on its own after working the loader a bit. I was cleaning my tractor the other day and noticed that my cylinder had stopped leaking. I guess that solves that... I'll wait until I have a leak again before buying any parts...

Cheers!:thumbsup:

Possible there was a small piece of debris stuck under the rod wiper area and it worked its way out. This would allow a small amount of oil to leak/weep past the wiper.

Roy
 

Tractor & Equipment Auctions

2015 MACK GU713 (A50854)
2015 MACK GU713...
2017 Ground Hog HD99 Towable Hydraulic Auger (A49461)
2017 Ground Hog...
2000 FORD F450 SUPER DUTY SINGLE CAB FLATBED TRUCK (A51406)
2000 FORD F450...
MAXUM 1000 TRIPLEX PUMP POWERED BY 3412 CATERPILLAR ENGINE (A50854)
MAXUM 1000 TRIPLEX...
LOT LOCATIONS (A51219)
LOT LOCATIONS (A51219)
2007 Peterbilt 335 Mickey AO-A Battery Truck (A50323)
2007 Peterbilt 335...
 
Top