Loader Cylinder stopped leaking

   / Cylinder stopped leaking #1  

hawkeye08

Elite Member
Joined
Jul 16, 2010
Messages
3,615
Location
Pacific Northwest
I posted a while back about my curl cylinder leaking and got the information I needed to repair it this winter (don't need another project now). I then read about someone having a leak stop on its own after working the loader a bit. I was cleaning my tractor the other day and noticed that my cylinder had stopped leaking. I guess that solves that... I'll wait until I have a leak again before buying any parts...

Cheers!:thumbsup:
 
   / Cylinder stopped leaking #2  
I posted a while back about my curl cylinder leaking and got the information I needed to repair it this winter (don't need another project now). I then read about someone having a leak stop on its own after working the loader a bit. I was cleaning my tractor the other day and noticed that my cylinder had stopped leaking. I guess that solves that... I'll wait until I have a leak again before buying any parts...

Cheers!:thumbsup:

Maybe something (dirt) was sticking the control valve open a hair?? Who knows but I once had a tire stop leaking all by itself - I guessed the valve had dirt in it and eventually blew out when I inflated it.
 
   / Cylinder stopped leaking #3  
I wish some of my repairs would fix themselves. I usually turn a simple repair into one that is much more complicated than I originally thought. Live and learn.
 
   / Cylinder stopped leaking #4  
My the clog be small..might be good idea change filter before snow piles up.
 
   / Cylinder stopped leaking #6  
I posted a while back about my curl cylinder leaking and got the information I needed to repair it this winter (don't need another project now). I then read about someone having a leak stop on its own after working the loader a bit. I was cleaning my tractor the other day and noticed that my cylinder had stopped leaking. I guess that solves that... I'll wait until I have a leak again before buying any parts...

Cheers!:thumbsup:

Possible there was a small piece of debris stuck under the rod wiper area and it worked its way out. This would allow a small amount of oil to leak/weep past the wiper.

Roy
 

Tractor & Equipment Auctions

2022 GTS FS35-G2 Flex Draper Header (A50657)
2022 GTS FS35-G2...
2014 John Deere 6125M Utility Tractor (A50657)
2014 John Deere...
2019 Ford Explorer AWD SUV (A50324)
2019 Ford Explorer...
2004 FORD F-650 SUPER DUTY DUMP TRUCK (A51406)
2004 FORD F-650...
2013 AMSIG S/A Solar Towable Message Board (A50322)
2013 AMSIG S/A...
2008 Kenworth T300 T/A Knuckleboom Crane Truck (A50323)
2008 Kenworth T300...
 
Top