Loader Cylinder stopped leaking

   / Cylinder stopped leaking #1  

hawkeye08

Elite Member
Joined
Jul 16, 2010
Messages
3,615
Location
Pacific Northwest
I posted a while back about my curl cylinder leaking and got the information I needed to repair it this winter (don't need another project now). I then read about someone having a leak stop on its own after working the loader a bit. I was cleaning my tractor the other day and noticed that my cylinder had stopped leaking. I guess that solves that... I'll wait until I have a leak again before buying any parts...

Cheers!:thumbsup:
 
   / Cylinder stopped leaking #2  
I posted a while back about my curl cylinder leaking and got the information I needed to repair it this winter (don't need another project now). I then read about someone having a leak stop on its own after working the loader a bit. I was cleaning my tractor the other day and noticed that my cylinder had stopped leaking. I guess that solves that... I'll wait until I have a leak again before buying any parts...

Cheers!:thumbsup:

Maybe something (dirt) was sticking the control valve open a hair?? Who knows but I once had a tire stop leaking all by itself - I guessed the valve had dirt in it and eventually blew out when I inflated it.
 
   / Cylinder stopped leaking #3  
I wish some of my repairs would fix themselves. I usually turn a simple repair into one that is much more complicated than I originally thought. Live and learn.
 
   / Cylinder stopped leaking #4  
My the clog be small..might be good idea change filter before snow piles up.
 
   / Cylinder stopped leaking #6  
I posted a while back about my curl cylinder leaking and got the information I needed to repair it this winter (don't need another project now). I then read about someone having a leak stop on its own after working the loader a bit. I was cleaning my tractor the other day and noticed that my cylinder had stopped leaking. I guess that solves that... I'll wait until I have a leak again before buying any parts...

Cheers!:thumbsup:

Possible there was a small piece of debris stuck under the rod wiper area and it worked its way out. This would allow a small amount of oil to leak/weep past the wiper.

Roy
 

Tractor & Equipment Auctions

71067 (A49346)
71067 (A49346)
2016 PETERBILT 579 TANDEM AXLE SLEEPER (A51219)
2016 PETERBILT 579...
4- 6 DRILL COLLARS (A50854)
4- 6 DRILL COLLARS...
2011 L3 MEP-806B GENERATOR (A51222)
2011 L3 MEP-806B...
Knapheide Service Bed (A50860)
Knapheide Service...
2002 Ford F-150 Pickup Truck (A50860)
2002 Ford F-150...
 
Top