Cub Cadet 737-3062 Fluid Hydr/Trans G

[GTSRider]

Must Cub Cadet 737-3062 Fluid Hydr/Trans G, be used in my Cub Cadet 3206,
or can I use Tractor supply Hydraulic Fluid ?
Also what is the capacity with new filter, on a fluid drain change ?
Thanks,
Pete
Hudson Valley , NY

 

[Bob_Bainbridge]

Synthetic Drive System Fluid Plus is the recommended fluid for late model Cubs. Many people, myself included, have been using Mobil 1 10W50 synthetic oil instead. I used it for several years in my 3235 with no problems. Mne had an oil leak at the time and $40+ per gallon was getting costly.

Bob B.

 

[GTSRider]

Synthetic Drive System Fluid Plus is the recommended fluid for late model Cubs. Many people, myself included, have been using Mobil 1 10W50 synthetic oil instead. I used it for several years in my 3235 with no problems. Mne had an oil leak at the time and $40+ per gallon was getting costly.

Bob B.

Thanks Bob.... will consider a synthetic.... but probably won't go that route... tractor is old , with about 1,200 hrs.
on it...put a lot of new parts on.... CARB to fuel tank is all new. new seals in hydraulic lift lines also.
but anyway.....would you know capacity of fluid in rear tranny ? .....of course , I can always fill slowly ,and check level with dip stick.

 

[Bob_Bainbridge]

The 3206 manual calls for a capacity of 4.5 quarts.

Bob B.