cub 1811

[Donsyl]

i have a flat tire on the front of my 1811 cub and i took off the bolt that is on the axle, and the wheel doesnt come off. Is there some kind of a keeper ring on the axle or something?

 

[rcbe]

1811 Serv manual: http://www.ihregistry.com/books/772-3899.pdf

See Pp 51. Appears should slide off spindle afte bolt/washer removal. Prolly a bad case of rustitus - good time to dose 'em down wit yer favorite rust eater concoction and hopefully get them busted loose w/o damaging anything.

 

[Donsyl]

thanks, ill spray it down.....i didnt think there was anything holding it on after taking out the bolt, but i didnt want to ruin anything.....thanks again.....Don

 

[Donsyl]

I sprayed it and let it sit overnight, and nothing. i ended up taking off the spindle and put the bolt back on without the big washer and drove it thru the wheel.......ill have to emerycloth the spindle and grease her up good....thanks for the help

 

[rcbe]

Would also closely chk the condition of that wheel's inner/outer brgs - a chance that they got messed up a bit during the emergency teardown ?