cub 149 hydrostat lever

[Donsyl]

Hey guys i need advise again......my 149 has a hydrostat tranny. the lever is able to move a little to easy and would move while driving it and change speed....is there a way to snug that up a little so that it wont move while mowing...thanks again guys

 

[dex3361]

Hey guys i need advise again......my 149 has a hydrostat tranny. the lever is able to move a little to easy and would move while driving it and change speed....is there a way to snug that up a little so that it wont move while mowing...thanks again guys

Follow the shaft down along the steering column in behind the gas tank and there is a friction clamp that adds friction to the operation of the HST lever. PM me with your email address if you need a better explanation and I can send you a PDF for that machine. :thumbsup:

 

[Donsyl]

dex thanks for the advise.....that was deffinitely the problem....Don

 

[dex3361]

dex thanks for the advise.....that was deffinitely the problem....Don

Good deal. Glad to be of help. I have a repair manual if you need it for that machine but you will have to PM me with a e-mail address as you cannot send files through the PM of TBN