Crank Seal

[Fornshell]

Can you install a JD 2240 Crank seal without special tool.

 

[ruffdog]

It looks like it is similar to this seal replacement video and I think it would be tough to do it without the tool. The seal must push in hard because it is a press fit in the block and on the crank and it must be installed straight.

 

[Fornshell]

Yes I watched that video. Expensive tool for one install.

 

[ruffdog]

There are a bunch of non-deere seal installers sold online. Will a shop loan/rent one to you?

 

[Fornshell]

Ok thanks I'll look online.

 

[MTGreen]

You can partially install it using the flywheel. Then you know it goes on straight. You'll have to tap it the rest of the way in though. If you're careful you can get it in there without getting it cockeyed.
Alternatively if you have access to a lathe you can make your own

 

[Fornshell]

Thanks for your help,that's kinda what I had in mind using the flywheel.

 

[ruffdog]

john deere crank seal tool AR92893 - Google Search

 

[Fornshell]

Ok thanks for the information, will look it up

 

[Tx Jim]

john deere crank seal tool AR92893 - Google Search

AR92893 subs to DZ111672 when entered into JDparts.com search

 

[Fornshell]

Ok thanks

 

[Fornshell]

I bought the rear crank seal from JD. They say this seal requires the special tool for installation or it will leak.I found one online for 133 dollars, guess I'll have to get it . Don't want to split it again and waist a good seal.

 

[Fornshell]

Received my rear crank seal installer tool today, And the pilot piece won't bolt to the crank. But tool seams the right size for the seal.

 

[Fornshell]

Can anybody help me out on a part # for this tool. JD 2240 Rear crank seal installer. I ordered one for DZ111672 seal but the pilot piece won't lineup with crank.