Backhoe Control valve leakes

[Dslate]

I have a 6TB backhoe attached to my CT235. The control valve is leaking and I would like to rebuild it but the rebuild kit is over 3,000.00 through Bobcat. Its a old Rhino backhoe but they don't make them any more. Anyone have any ideas as to how I could get parts other then through Bobcat?

 

[Jabonee]

The one piece valve is not serviceable. 3k is for new valve that replaces it.

 

[Wild and Free]

I would seek out a hydraulic shop for parts options or a more reasonable and newer style serviceable replacement control valve.

 

[LD1]

Define the leak?

Is it leaking oil externally? If so.....its probably just common 50 cent o-rings that seal the spools.

If its leaking internally.....meaning weak hydraulics....stuff leaking down.....etc.....then that isnt something that is serviceable on any common spool valve....and replacement is the only solution

 

[winston1]

Not sure what you need or what you have but here is a seal kit for the one piece valve for way less than $3000. 73588 KIT, SEAL - 73588 - Bobcat spare part, replacement part

 

[Dslate]

Not sure what you need or what you have but here is a seal kit for the one piece valve for way less than $3000. 73588 KIT, SEAL - 73588 - Bobcat spare part, replacement part

Looks like it is the "Valve, Section Float" on the second section". Bobcat has the part for about $1,000. I'll try agaparts.com see if they have it any cheaper.
Thanks for the help.

 

[powerscol]

Have you checked Bobcat Genuine Parts Catalog – Official Bobcat Company site Under product type pick attachments then on the left side backhoe, then compact tractor, then 6TB. You will find a full breakdown on the control valve (towards the bottom of the 6tb breakouts) including seal part numbers etc

Hope this helps

 

[dfkrug]

Looks like it is the "Valve, Section Float" on the second section". Bobcat has the part for
about $1,000. I'll try agaparts.com see if they have it any cheaper.

That's still way too much, IMO.

As a benchmark, you can replace your whole hoe valve stack with a 12 GPM Prince 6-spool setup from
Surplus Center for $800. There is an active thread on TBN right now on that.

My hoe valve leaks now, too, but it will have to leak more before it becomes a repair
necessity.