shelbyrose
New member
Hi folks shelbyrose here .just purchased a 1250 diesel cockshutt she has had a hard life up to now.issued with electrical system or lack of now starting with screwdriver.any suggestions will help TKS.
cockshutt woes
- Thread starter shelbyrose
- Start date
- Views: 1481
TBN Support
TBN Support
- Joined
- Feb 4, 2015
- Messages
- 4,560
Hi, Shelbyrose! Welcome to the forum!
:welcome:
I'm going to move your thread over to the vintage tractors section to see if we can get you some advice.
:welcome:
I'm going to move your thread over to the vintage tractors section to see if we can get you some advice.
DJ54
Elite Member
- Joined
- Jan 20, 2009
- Messages
- 4,660
- Location
- Carroll, Ohio
- Tractor
- IH Farmall 656 gas/ IH 240 Utility/ 2, Super C Farmalls/ 2, Farmall A's/ Farmall BN/McCormick-Deering OS-6/McCormick-Deering O-4/ '36 Farmall F-12/ 480 Case hoe. '65 Ford 2000 3 cyl., 4 spd. w/3 spd Aux. Trans
It should be the same as an Oliver 1250. Starter switch was pretty easy, shows 2 places, with 2 in stock each. http://www.machinerytrader.com/list/PartsSearch.aspx?partnum=671432A&PST=Exact
Hope the link carries through, already selected the Oliver 1250. Object moved If you look through the menu, it may show you somewhat of as wiring diagram. I did notice when looking at one harness, it said procure locally.
Hope the link carries through, already selected the Oliver 1250. Object moved If you look through the menu, it may show you somewhat of as wiring diagram. I did notice when looking at one harness, it said procure locally.
RickB
Super Star Member
- Joined
- Sep 18, 2000
- Messages
- 15,190
- Location
- Up the road from Dollar General WNC
- Tractor
- Just a Scag
Built by Fiat.
Here are some similar links:
