CK35 HST Pedal Problem

[mgarner]

HST pedal not returning to neutral position without help but ONLY when in high range. In other ranges it operates as it should. Anyone have a
possible solution??

 

[Midniteoyl]

Dunno if this helps..

Hydro pedal sticky on CK35

I purchased this tractor new a couple years ago and always had the problem of the hydro pedal sticking. Lately though it has gotten increasingly worse. It was becoming very dangerous to operate. About a year ago it was brought to the dealer and was basically told that it was the nature of the...

www.tractorbynet.com

 

[mgarner]

What is different in my case is that the linkage is free when tractor is in medium or low range but will be really slow returning to center when in high. By slow I mean it takes 10 to 20 seconds if I let it return on its own which means I have to rock it back with my heel. I have gotten use to doing that and unless it is a simple fix I will leave it as is for now but would have some idea what is causing the problem

 

[Tinhack]

Did you read the entire thread? If it's still under warranty, have them replace the HST. If not, break out the check book.

 

[mgarner]

Long out of warranty so will keep the check book in the desk and keep running it like it is. It has been that way for a few years now and maybe, since I am 87 now it will outlast me. Consider the problem as forgotten.