CK25 HST Tie Rod Ends

[rmahlert]

Anyone know of an aftermarket alternative for the tie rod ends on a CK25 HST? My local dealer is up there, plus, I need to pay for the UPS shipping from the warehouse for them.

Thanks,

 

[Robin Veerman]

My local dealer is up there
What do you mean?

What’s the expected cost all in?

 

[ptsg]

Michigan Iron Equip lists those for about $64 each. Don't know about shipping costs.

 

[5030]

Check on Flea Bay. There are a number of aftermarket suppliers there that are less expensive.

 

[Robin Veerman]

Flea bay is exactly that. Mostly cheap Chinese junk…
$64 for OEM sounds reasonable to me.

 

[5030]

Flea bay is exactly that. Mostly cheap Chinese junk…
$64 for OEM sounds reasonable to me.

I disagree with your premise. Lots of good domestic stuff on Fleabay but you have to use discretion. Amazon is a different story... And not everything is cheap Chinese junk either. The Chinese, with proper oversight, can produce quality stuff like Milwaukee and DeWalt tools for instance.

 

[MTGreen]

Flea bay is exactly that. Mostly cheap Chinese junk…
$64 for OEM sounds reasonable to me.

I wouldn't be surprised if the OEM ones and most of the aftermarket ones are also chicom made. Chicom-child-slave-labor manufacturing is capable of making parts to spec if provided with proper oversight as 5030 mentioned above

 

[5030]

Not sure about this brand but Kubota tie rod ends have no grease fittings installed in them, however, the 'aftermarket' ones do. I bought my last set from a Fleay Bay seller btw. Not that it's something I need to replace very often because I don't.

Finally, I sell some of my products on Flea Bay myself and they surely aren't made across the pond either.

 

[LouNY]

Here is a link to Moog suspensions tie rod ends by size,
measure the taper and threads desired, cross reference the moog number to which ever brand you prefer.
https://www.moog-suspension-parts.com/universal_outer_tie_rod_ends.asp

 

[5030]

Far as I know, MOOG is no longer made here. I believe Mexico.

 

[JimR]

Here is a link to Moog suspensions tie rod ends by size,
measure the taper and threads desired, cross reference the moog number to which ever brand you prefer.
https://www.moog-suspension-parts.com/universal_outer_tie_rod_ends.asp

View attachment 831691

Thanks for posting this info up Lou. I noticed today that both my inner and outer tie rods on my NX4510 are shot. Hopefully I can match them up with Moog parts. I'll also post up on the forum looking for info in case somebody already has found the part numbers. (Update) I just found a pair on Ebay for $215 for the pair with free shipping. Kioti was $329.06 for one side.
Yeehaw.

 

[JimR]

Anyone know of an aftermarket alternative for the tie rod ends on a CK25 HST? My local dealer is up there, plus, I need to pay for the UPS shipping from the warehouse for them.

Thanks,

There are two sets listed on Ebay right now for $104.75 each.