Charge Light Staying On - Redux

   / Charge Light Staying On - Redux #11  
Tom_Veatch said:
The 6 wire, rectangular plug is the right interface, and I might want to talk to you about a replacement if/when I decide this thing is beyond hope. Right now, 'though, it seems my speaking sternly to it earlier today had the right effect. The charge light was behaving itself and the voltage across the battery was gradually building back up from the starting drain when I ran it up a few minutes ago. (I don't suppose the box/package/etc. they come in has a wiring diagram/schematic attached, does it?)

I wouldn't be too concerned about it for an $85 regulator, as long as it is charging. Is the fan belt tight enough?
 
   / Charge Light Staying On - Redux #12  
Tom_Veatch said:
(I don't suppose the box/package/etc. they come in has a wiring diagram/schematic attached, does it?)

It's good that you don't suppose so.;) They don't.
 
   / Charge Light Staying On - Redux
  • Thread Starter
#13  
normde2001 said:
I wouldn't be too concerned about it for an $85 regulator, as long as it is charging. Is the fan belt tight enough?

Yep. In fact as a part of my "end of season" maintenance, I replaced the fan belt, which was beginning to show signs of deterioration, and the lower and bypass coolant hoses.

Bypass hose was beginning to show fabric on the outside of the "U" and the lower hose had a groove worn in it from contact with the fan belt. I think either (or both) the old belt was slightly too short or the old hose was slightly too long. There's plenty of clearance with the new parts.
 

Tractor & Equipment Auctions

2017 Ford F-150 4x4 Crew Cab Pickup Truck (A50323)
2017 Ford F-150...
Target Ecoline Walk-Behind Concrete Saw (A49461)
Target Ecoline...
Morooka MST 660VD Tracked Dump Truck (A52128)
Morooka MST 660VD...
2016 MACK GU713 GRANITE DUMP TRUCK (A51222)
2016 MACK GU713...
John Deere 7130 Loader Tractor (A50514)
John Deere 7130...
2008 Ford F-250 Knapheide Service Truck (A50323)
2008 Ford F-250...
 
Top