chain installation

jam2004 · Nov 20, 2004

I recently ordered a set of rear chains from my dealer. I cut open the sack they came in and there was no manual included--just the chains. Any tips on how to install them on my 2230?

MadReferee · Nov 20, 2004

Go to www.tirechains.com where there are instructions for installing various types of tire chains.

jam2004 · Nov 21, 2004

Thanks Mad.

sandyc · Nov 21, 2004

Watch the clearance between the inside of the tires with the chains installed. You might need a spacer to get the appropriate distance from the chains to the fenders and other stuff. In the past, when I used to use chains, I would install the inside at the loosest possible position and then use shock cords as spreaders to take up the tension on the outside.

I am now running a 2200 with filled Ag tires and have not found the need for chains. Once the beast is in four wheel there is not too much that will cause wheel spin. I also run a weight box for blowing and or plowing.

jam2004 · Nov 21, 2004

Thanks sandyc. I guess you see a few inched from time to time up there.

moweraxle · Nov 21, 2004

I have chains on my BX2200 with turf tires and have no problems with anything hitting. I adjust the inside and outside of the chain on the same link. Good luck

jam2004 · Nov 21, 2004

</font><font color="blue" class="small">( I have chains on my BX2200 with turf tires and have no problems with anything hitting. I adjust the inside and outside of the chain on the same link. Good luck )</font>

Thanks. I just found this "link". Pun intended.

http://www.jackssmallengines.com/install_tirechain.cfm