Toplink CCM Hydraulic Toplinks have Arrived!!

HayDR · Mar 30, 2007

The CCM hydraulic toplinks and side links with double piloted check valves will arrive at CCM on Monday April 2. Please give us a day to check them in before you call and place your order. We will start taking orders Tuesday April 3. ALL sizes should be available.
Thank you for your patience and support.
Mark Carter

MadReferee · Mar 30, 2007

Fantastic. I hope your shipment contains plenty of each size.

flINTLOCK · Mar 30, 2007

Toplink for the TC40DA NH series should be their middle size cylinder, 18-26"??

MadReferee · Mar 30, 2007

What does your existing top link measure? You need to get one that is close to that measurement.

n8wrl · Mar 30, 2007

MadReferee said:
What does your existing top link measure? You need to get one that is close to that measurement.

My L5030 is Cat 1/2 and i have an implement where I'm opening the top-link to 34" now. I think it's really because the side arms are longer. Is there a way to extend the hydraulic links? maybe an extension on the cylindar? I don't need it to throw more, just reach farther

-Brian

flINTLOCK · Mar 30, 2007

Unfortunately, my tractor won't get delivered for 2 weeks, so I can't really measure it right now. Thanks for the suggestion, though. I was hoping someone with a TC40DA might shed some light on this.

Slippy · Mar 31, 2007

I can check mine for you if you tell me what to measure.

flINTLOCK · Mar 31, 2007

Thanks, slippy. I don't know for sure. I guess it's the length of the TL from end to end all the way extended and all the way shortened??

Slippy · Mar 31, 2007

I tried to measure center of pin at bottom to center of pin at top. Cranked all the way in is about 15" and all the way out is about 20", so about 5" of travel. Hope this helps.

flINTLOCK · Mar 31, 2007

That extremely helpful. I believe that's all I need. They suggested their medium might work, but that's 18-26" according to the guy on the phone from CCM.