Kbars
New member
Can you send me a copy of the Case 10 sickle mower manual or tell me where your server is to download it? My e-mail is kbarsminis@hotmail.com Thanks. Kbars
Case 10 Sickle Mower, usage and maintenance
- Thread starter project_X
- Start date
- Views: 33397
-
- Tags
- sickle bar mower
tude
Silver Member
I have a PDF copy T-10 trailer model that is 12 meg in size that be emailed.
ky wonder
New member
- Joined
- Jul 17, 2011
- Messages
- 12
- Tractor
- allis chalmers 6060, john deere 5210,4020, oliver 1355
I just aquire a case #10 trail type mower, I would really be great full for a copy of the manual as well,
tude
Silver Member
Sure will need email address.
Last edited:
IronPony
New member
- Joined
- Jul 12, 2011
- Messages
- 3
- Location
- Shaunavon, Saskatchewan
- Tractor
- Massey 65, John Deere AR, 1950's Deutz
IronPony
New member
- Joined
- Jul 12, 2011
- Messages
- 3
- Location
- Shaunavon, Saskatchewan
- Tractor
- Massey 65, John Deere AR, 1950's Deutz
I have the pull-type version of the Case-10 mower. Does anyone happen to know the size (bore and stroke) of the hydraulic cylinder? Mine was missing when I bought it last week.
sredfern
New member
If you still have the manual I would really appreciate a copy of it. My email address is ohbaroh@msn.com. I just purchased the three point model and there are a few parts missing that I can fabricate but it would be great to see what they really look like,how they fit, and their purpose. Thanks so much for your response.
MartinHunt
New member
The weather just turned hot in the midst of my mowing and now my belt started slipping badly. The pto shaft spins away but the power won't translate to the cutter. I can see that there are three bolts securing the drive pulley which is offset in the main frame housing. So, presumably, I should be able to loosen the bolts and adjust the pulley orbitally to get the belt to tighten but I can't get the the thing to move. Does anyone know how to do this on a Case 10? Thanks. Also, if there are still PDFs of the manual available, I would appreciate one at marstafofam@yahoo.com.
MartinHunt
New member
Wrong. I loosened the three bolts even more and determined that there is no orbital or cam adjustment. So, at this point I have no idea how to tighten the belt. Any suggestions would be appreciated. In the meantime I will order a hardcopy of the owner's manual. Thanks.