BX25D. Mod #1 and continued.
- Thread starter 4shorts
- Start date
- Views: 364360
-
- Tags
- kubota bx25d
OP
4shorts
Elite Member
A little off topic but you have to wonder why more guys aren't killed on these machines :shocked:
Kubota Tractor Handstand - YouTube
Kubota Tractor Handstand - YouTube
CanuckPT
Gold Member
Yup - can't fix stupid! There's a Darwin Award waiting to be presented to his future widow for sure!!
OP
4shorts
Elite Member
Glenn with the Chipper on mine I can hardly tell it's back there but I haven't used it on rough ground yet either so It might be very different when that happens and I'll be sure to let you know. If everything lines up right for me personally I should be giving it a good run tomorrow evening. As for the wheel spacers. They were one of the first items I purchased for the tractor. I think of it like this. Stand up straight with your legs close together and allow yourself to sway to the side left and right. It's easy to fall over isn't it? Now do the same but put your legs apart and sway side to side again. It feels much firmer doesn't it? Well that's the way the BX feels and for me being in the seat I like having all the stability I can get
RaydaKub
Veteran Member
Cuz most people have more common sense than that idiot. Obviously no rear ballast. Front axle took a heck of a beating in those few seconds. And maybe the landing shook some sense into his brain, but I doubt it.
OP
4shorts
Elite Member
Well these two mods will be the last I'll be posting on the BX25D. In the last two weeks I've come up with a lot of different mods that I think are unique to this type of tractor and practical. If your not tired of seeing this stuff then you should be because I am at this point lol.
Anyway we all know how important it is to have a tool box on a tractor. Well it's the same for a chipper I guess so ours now has it's own tool box. The brackets are all aluminum and I used the existing holes that I had for the chipper extension. I also lined the box with some foam to help save the bottom of the box when throwing items in it and yes. I did drill a few small holes in the box to let any water out that may find it's way in.
I also had a pair of branch cutters that I wanted to have on hand so I made a holder for them out of some scrap aluminum I had then tig welded everything together. I put the tool box and cutter holder on the feeder side of the machine becuase I didn't want to have to walk over to the other side each time I needed them. Yes, I'm getting lazy lol.
To keep the boredom going I attached a few extra photo's for you viewing pleasure.
Thanks everyone for your comments and encouragement. I hope you walked away with a few ideas and even a hint of how to do them. Happy tractoring :thumbsup:
Anyway we all know how important it is to have a tool box on a tractor. Well it's the same for a chipper I guess so ours now has it's own tool box. The brackets are all aluminum and I used the existing holes that I had for the chipper extension. I also lined the box with some foam to help save the bottom of the box when throwing items in it and yes. I did drill a few small holes in the box to let any water out that may find it's way in.
I also had a pair of branch cutters that I wanted to have on hand so I made a holder for them out of some scrap aluminum I had then tig welded everything together. I put the tool box and cutter holder on the feeder side of the machine becuase I didn't want to have to walk over to the other side each time I needed them. Yes, I'm getting lazy lol.
To keep the boredom going I attached a few extra photo's for you viewing pleasure.
Thanks everyone for your comments and encouragement. I hope you walked away with a few ideas and even a hint of how to do them. Happy tractoring :thumbsup:
OP
4shorts
Elite Member
Box pics.
J F
Elite Member
:thumbsup: Nice stuff again, Paul. I don't think many of us are getting tired of your mods, I know I'm not. I can't remember if I mentioned it, but I loved your latest vid, good/informative stuff (& brave Milo, too :laughing.
.
OP
4shorts
Elite Member
:thumbsup: Nice stuff again, Paul. I don't think many of us are getting tired of your mods, I know I'm not. I can't remember if I mentioned it, but I loved your latest vid, good/informative stuff (& brave Milo, too :laughing
Thanks Jay. I appreciated all your comments. Ya Brave Milo. He's our grand dog. Our boy got married last summer and we had to doggy sit for two weeks. Man that little dog was some fun to have around. Glad you enjoyed the video. The next few will be with the machine working
J F
Elite Member
Schweet.
aczlan
Good Morning
- Joined
- Mar 7, 2008
- Messages
- 17,540
- Tractor
- Kubota L3830GST, B7500HST, BX2660. Formerly: Case 480F LL, David Brown 880UE
Ditto. Love reading about your mods.:thumbsup: Nice stuff again, Paul. I don't think many of us are getting tired of your mods, I know I'm not. I can't remember if I mentioned it, but I loved your latest vid, good/informative stuff (& brave Milo, too :laughing
Aaron Z
Big Wave D
Platinum Member
- Joined
- May 13, 2010
- Messages
- 538
- Tractor
- Kubota L35, Kubota B6200E
Paul,
Who does all your custom decals for you or do you own something like the Cricut die cutter I have seen advertised? I get a kick out of your "labeling". :thumbsup:
Who does all your custom decals for you or do you own something like the Cricut die cutter I have seen advertised? I get a kick out of your "labeling". :thumbsup:
mjncad
Super Member
Matt I'm still not convinced about powder coating. I've purchased MANY items that had it from snow blades, implements,snow blowers, tools of all kinds including vehicle hoists and out of all of it I (me personally) have NEVER seen it last any amount of time and I mean NEVER.
Until I get to see for myself that powder coating can last any longer than I've seen it I'm going to continue to say its just a cheap inexpensive way for manufactures to get their product to market fast and cheap and the **** with the customer.
That being said here's a response from another site on the photos I supplied.
Quote:
Seeing stuff like this makes me want to scream. It really gives the powder coating industry a bad rap.
I work at a small to mid-size powder coating outfit in southern BC and not a week goes by that a customer comes in and doesn't want to pay our prices to do proper prep work.
Luckily our outfit does most of our coating for other departments within our company so if we can't convince them we send them on down the road.
Steel for any outdoor application should always be sandblasted, zinc epoxy primed and then colour coated.
The quote from the other site is spot on regarding proper powder coating prep. Another thing is that certain powders are designed only for indoor use. The manufacturers plainly state this on their color charts, and yet people will use them on outdoor projects and wonder why the stuff fails.
Around here I see so many GM and Chrysler vehicles and the occasional Ford that are painted white and the paint has peeled off in sheets. What surprises me is that it's white that's failing in epic proportions. I would expect that of certain reds or other colors; but white?
You are correct about manufacturers using powder coating to save a buck as the labor if manually sprayed on doesn't have to be as skilled as someone who uses a paint gun. Another reason the manufacturers like powder coating is that it earns them brownie points with the EPA and tree huggers as the stuff tends to be non-toxic, the excess can be resused if collected properly, and no VOC's are present. The company who I use for powder coating does it as a sideline to their primary business of metal fabrication. The guy I deal with has told me the powder coaters are the lowest paid guys in the shop as they are unskilled labor. Roadrunner Fabrication
Another thing I've noticed is anything made in China tends to have crappy finishes regardless of type.
That inDUHvidual is a dumbass worthy of a Darwin Award. Let's hope he hasn't bred.
Paul's wife makes the custom decals.
varmint
Elite Member
- Joined
- Mar 17, 2003
- Messages
- 2,577
- Location
- Northern Maryland
- Tractor
- Kubota B8200, then a Kubota L3130 HST, now a Kubota L3400 HST
Can't think of a better place to throw this neat little video into the mix: sort of rough hewn 4shorts kinda guys, but in Texas!
Central Texas Tools (Texas Country Reporter) - YouTube
Central Texas Tools (Texas Country Reporter) - YouTube
radioman
Super Member
very nice mods! I really like the lopper holder. I carry mine on the rops antirattle knob. (bad place for it - it might get caught on a branch)
OP
4shorts
Elite Member
Thanks Aaron. Happy to hear that. Glad I got this finished now. Its hard keeping the shop work done and these mods all at the same time.
Yesterday we came to a financial settlement with the manufacture of the chipper for the powder coating pealing. It would have never happened only for my Kubota dealer so my next project in the fall will be to sand blast, epoxy prime and paint the new chipper so I may post that work then.
Yup the wife does them. Earlier in this thread there was a lot on the topic. As for the labelling well that's me
"Stihl Here" lol
Well you and I have had many conversations on the topic of powder coating and I do believe you when you say its great stuff when done right. My only problem is I've personally never seen it done right. NEVER
Oh man what an honour to be compared to those guys in any way. I just love that video and those guys are really true craftsmen in my mind. Thanks for this :thumbsup:
Thanks man. Ya I needed a tool box and the clippers and they needed to be close to the area I'm working in so that should do it. Kind of need a chain box as well but I promise I won't post that :laughing:
cschulz
Gold Member
Yup the wife does them. Earlier in this thread there was a lot on the topic. As for the labelling well that's me
"Stihl Here" lol
Im far from a grammar expert but I believe Stihl is pronounced like "Steel" not "Still". Please correct me if Im wrong but would that make your saw holder "Steel Here" Or maybe change it to "Place Steel Here".
Here is a Stihl video...........STIHL Dealer Days 2013 is Happening Now! - YouTube
Chris
OP
4shorts
Elite Member
Yes technically your right BUT everyone around here says it like "Still". Then again there are folks around here that call a "Car" a Caw" or a "Brother" a "Brudder" so what can I say :confused3:
kiotiken
Veteran Member
Man I love Newfoundland, but holly CR@P are some of you guys hard to understand :laughing: After you've been properly squreeched in, we all sound the same anyway! Maybe it's a Canadian thing, but I say "Still" to.
rockshaft
Gold Member
Please educate me, as i have some of the supplies to start powder-coating, and want to do it right. Is this epoxy primer a powder/oven application? Or are you talking about a liquid? If liquid, is it a 2-part epoxy mix?
When i've tried to buy 2-part epoxy paints at my local autoparts stores they look at me with crossed eyes, don't stock any. I have used some in marine applications.
Excellent work 4shorts! Any plans for a grapple? Or did i miss that post!
When i've tried to buy 2-part epoxy paints at my local autoparts stores they look at me with crossed eyes, don't stock any. I have used some in marine applications.
Excellent work 4shorts! Any plans for a grapple? Or did i miss that post!
