Bush Hog Maintenance

   / Bush Hog Maintenance #1  

Jer

Member
Joined
Nov 20, 2003
Messages
26
Location
So. California
Tractor
Two tractors..both Mitsubishi. MT160D 4WD with a Brush Cutter. The other is a MT1601 4WD with a loader
I’ve purchased a tractor with a 48” rotary Texas Belton Continental “Bush Hog”. I think its about 15 or 20 years old. I do not have a Manuel with the machine and would like to know what type oil to use if needed in the transfer case on the rear and also what other maintenance may be required.
Thanks, Jerry S.
 
   / Bush Hog Maintenance #2  
You probably will need to use 80w to 90w gearbox oil.

As for other maintenence, find all grease fittings and make sure to keep them well greased.
 
   / Bush Hog Maintenance #3  
I agree with Dave, keep the gearbox up to level and keep the blades sharp. Good Cutting!
 
 

Tractor & Equipment Auctions

TOPCAT HCRC 72" HYD BRUSH CUTTER (A52706)
TOPCAT HCRC 72"...
2013 Vermeer V800G T/A Towable Vacuum Trailer (A56857)
2013 Vermeer V800G...
John Deere 6110M (A53317)
John Deere 6110M...
LINCOLN ELECTRIC RANGER 225 GAS WELDER/GENERATOR (A54757)
LINCOLN ELECTRIC...
2015 Volkswagen Jetta Sedan (A55758)
2015 Volkswagen...
2023 Kubota U27-4 Mini Excavator (A55973)
2023 Kubota U27-4...
 
Top