Bush Hog Maintenance

/ Bush Hog Maintenance #1  

Jer

Member
Joined
Nov 20, 2003
Messages
26
Location
So. California
Tractor
Two tractors..both Mitsubishi. MT160D 4WD with a Brush Cutter. The other is a MT1601 4WD with a loader
I’ve purchased a tractor with a 48” rotary Texas Belton Continental “Bush Hog”. I think its about 15 or 20 years old. I do not have a Manuel with the machine and would like to know what type oil to use if needed in the transfer case on the rear and also what other maintenance may be required.
Thanks, Jerry S.
 
/ Bush Hog Maintenance #2  
You probably will need to use 80w to 90w gearbox oil.

As for other maintenence, find all grease fittings and make sure to keep them well greased.
 
/ Bush Hog Maintenance #3  
I agree with Dave, keep the gearbox up to level and keep the blades sharp. Good Cutting!
 
 

Marketplace Items

429829 (A61166)
429829 (A61166)
159120 (A60430)
159120 (A60430)
Alto Shaam 1000-TH-I Commercial Halo Heat Cook and Hold Oven (A60352)
Alto Shaam...
2010 Ford F550 Bucket Truck with Altec AT37G Boom (A56435)
2010 Ford F550...
2019 GALYEAN EQUIPMENT CO. 150BBL STEEL (A58214)
2019 GALYEAN...
2020 Peterbilt 567 Quint Dump (A62613)
2020 Peterbilt 567...
 
Top