Bush Hog blade replacement

   / Bush Hog blade replacement #1  

yanmars

Veteran Member
Joined
Nov 29, 2009
Messages
1,057
I had a bolt come out of my bush hog and one blade came off. The threads are pretty mangled. I have a replacement. Any trick to replacing it by myself. I think I can get the new in and started, unsure how much torque I will need to tighten it down and how to hold the blade to do that. I only have hand tools. Any ideas are welcome. Any reason to add lock tite?
 
   / Bush Hog blade replacement #2  
...Any reason to add lock tite?
Yea, So it doesn't happen again... :D :D

I had trouble getting the thread started... bolt falling out. I did it myself and it wasn't fun. Do you have another set of hands?

I think I ended up duck taping the bolt in place to get the nut on.
 
   / Bush Hog blade replacement
  • Thread Starter
#4  
Thanks for the information. I will see what I can do, if not I can take it off and bring it to my tractor shop.
 
   / Bush Hog blade replacement #5  
I stick the bolt through and let the weight and leverage of the blade bind the bolt in the hole. Tighten with a breaker bar. Did the new bolt come with a lock washer? I've never had an issue with using a lock washer. Another option would be to drill a hole in the bolt to use a cotter pin the keep the nut from coming off.
 
   / Bush Hog blade replacement
  • Thread Starter
#6  
It did come with a lock washer. Access is through a hole in the top of the mower deck, might be hard to get a cotter pin in. Also the stump jumper is pretty tight to the deck so not much room underneath to gain access.
 
 

Tractor & Equipment Auctions

2019 Chevrolet Tahoe SUV (A49461)
2019 Chevrolet...
2019-2024 Dodge Ram Front Bumper (A49461)
2019-2024 Dodge...
2014 INTERNATIONAL 7400 SBA 42 LUBE TRUCK (A51406)
2014 INTERNATIONAL...
2012 MACK GU713 DUMP TRUCK (A51406)
2012 MACK GU713...
Brown BDH-750 Disc Harrow (A50490)
Brown BDH-750 Disc...
2019 FORD F-150 XL SINGLE CAB TRUCK (A51406)
2019 FORD F-150 XL...
 
Top