brush moving 3 point attachment

[ChuckE]

Been forever sense I have been on here hope everything is going well

Due to the storm I have a lot of trees I am cutting and need to move the brush and logs to the road for city to pickup
My first choice would a a bucket graffle but I did not buy a loader 10 years ago and for the most part the are unavailable

pushing it out to the road with the box blade kind of sucks
any three point attachment you can think of to move it?

 

[scootr]

I seen forks for a 3 point. Get a set with a big headache rack.
Google it - I seen as cheap as 250.00

 

[ChuckE]

yea I was thinking something like forks but with 4 or five forks

might have to get out my welder and make something

 

[ChuckE]

something like this but for the 3 point

https://www.amazon.com/Clamp-Debris-Attaches-Tractor-Wwaste/dp/B0BBFKPGH7/ref=sr_1_49_sspa?crid=3OZ39HWAQXN5I&keywords=3+point+forks+for+tractor&qid=1664906564&qu=eyJxc2MiOiIzLjA4IiwicXNhIjoiMi42OSIsInFzcCI6IjEuOTIifQ%3D%3D&sprefix=3+point+fo%2Caps%2C118&sr=8-49-spons&ufe=app_do%3Aamzn1.fos.c3015c4a-46bb-44b9-81a4-dc28e6d374b3&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEyODJFMFRIRjNSVzJWJmVuY3J5cHRlZElkPUEwODMwNTU3MzZDVDBQS0JKUDNMNCZlbmNyeXB0ZWRBZElkPUEwMTAzMjc3M0VFRzlYMjBTVFM0SCZ3aWRnZXROYW1lPXNwX2F0Zl9uZXh0JmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ==

 

[Carl_NH]

Like these https://www.amazon.com/YINTATECH-Ca...ocphy=9002459&hvtargid=pla-942725941082&psc=1

Or you can take larger limbs on the bottom, then add smaller limbs and brush on top, then chain thru the bottom and around the trunks and pull them to the road.

Or make a skid/drag from a sheet of plywood and 2x4 runners?

 

[2manyrocks]

Not perfect alternatives, but you could also move material with a rear boom pole, a rear pond scoop, or a rear carryall. Or the most basic, drag it with a chain.

 

[ChuckE]

maybe best to just get a landscape/rock rake and turn it around backwards and push it

 

[ChuckE]

anyone want some free oak and other assorted fire wood
I have is available in central fla
All you want to cut a carry
All sizes up to 4' in diameter
I will even let you use my chainsaw

 

[scootr]

anyone want some free oak and other assorted fire wood
I have is available in central fla
All you want to cut a carry
All sizes up to 4' in diameter
I will even let you use my chainsaw

We hear ya but, I think everybody within a tank of gas from you is in the same boat.

 

[scootr]

We hear ya but, I think everybody within a tank of gas of you is in the same boat.

 

[airbiscuit]

 

[sandman2234]

I will be headed to SW Florida near the end of next week. The Disaster Relief team I am part of will be going 4 days earlier than me, as most of them don't have a real job to report to, lol! Depending on what I drive, I might be interested in a little bit of wood, but 4' won't fit on my splitter!!
David from jax

 

[sandman2234]

yea I was thinking something like forks but with 4 or five forks

might have to get out my welder and make something

The mast off of a small forklift is pretty easy to adapt to 3 point, as I have a couple laying around here! Beats nothing, for, and usually cheap enough!
How far are you from Port Charlotte?
David from jax

 

[SDT]

Not perfect alternatives, but you could also move material with a rear boom pole, a rear pond scoop, or a rear carryall. Or the most basic, drag it with a chain.

Binigo.

I use a chain most of the time.

 

[airbiscuit]

You can modify this to suit your needs.