Brake master cylinder 1 or 2?

   / Brake master cylinder 1 or 2?
  • Thread Starter
#11  
the parts manual has the pics, u must have a fel mounted to ur 5211, here is a couple pic that may help.


Thanks Mike the pics are a big help. I see the cover I am in the process of removing is already off in your pics.

Appreciate the info.
Neil
 
   / Brake master cylinder 1 or 2? #12  
also drain and refill the steering box while its down.
 
   / Brake master cylinder 1 or 2?
  • Thread Starter
#13  
Hi Mike, can you elaborate on draining the steering box for me, I am not sure what you mean. I am very proactive at preventative maintenance and look for any oppty to avoid issues and prevent wear and tear and this 5211 is new to me.
 
   / Brake master cylinder 1 or 2? #14  
dont have a pic of the drain and fill points, but do have a pic of the strg box, its an integral part of the upper trans housing, 90 weight hear oil is
whats needed, if it gets water in it often then the input shaft seal is leaking, old timers would fill it with grease using a grease gun [ band aid repair ],
i rebuilt mine and filled with 90w.

the crossover tubes in the box are NLA.
 

Attachments

  • 20181117_090503.jpg
    20181117_090503.jpg
    4.5 MB · Views: 173
   / Brake master cylinder 1 or 2? #15  
the above pic is the right side, the drain and refill points is on the left side, the correct pic is below.
 

Attachments

  • 20181117_090517.jpg
    20181117_090517.jpg
    4.1 MB · Views: 162
Last edited:
 
Top