3-Point Hitch Bouncing 3Point - Jinma 354

   / Bouncing 3Point - Jinma 354 #1  

cnsJohn

Bronze Member
Joined
Apr 21, 2012
Messages
50
Location
Lafayette, TN
Tractor
Jinma 354
I changed the hydraulic fluid and filter on my 354; now the 3pt bounces. The arms drop a few inches and the bounce back up to their set position. Any ideas for a fix?

Your insight and experience are greatly appreciated.

JohnJ
 
   / Bouncing 3Point - Jinma 354 #2  
Have you run it through several full cycles to purge any air in the system? Be sure to recheck fluid level afterword also.

Note: The only way you'll get a full cycle is to remove any implement and force the arms all the way down.
 
   / Bouncing 3Point - Jinma 354
  • Thread Starter
#3  
Thanks. I'm fixing to climb on it in a minute. I'll give it some cycles.

Thanks again for the suggestion.
 
   / Bouncing 3Point - Jinma 354
  • Thread Starter
#4  
CCWKen,

Seems no amount of lift arm cycling, without or with implement, has solved the bouncing issue. Any thoughts as to what else might be causing the problem?
 

Tractor & Equipment Auctions

2017 JLG Skytrak 6036 6,000LB 4x4 Rough Terrain Telehandler (A50322)
2017 JLG Skytrak...
PAIR OF PIPE RACKS (A50854)
PAIR OF PIPE RACKS...
2019 Generac MLTS-1 2.4kW Towable LED Light Tower (A49461)
2019 Generac...
2016 Ford Escape 4x4 SUV (A50324)
2016 Ford Escape...
2011 GENIE GTH-5519 (A50854)
2011 GENIE...
DEWALT ROTARY HAMMER (A50854)
DEWALT ROTARY...
 
Top