3-Point Hitch Bouncing 3Point - Jinma 354

   / Bouncing 3Point - Jinma 354 #1  

cnsJohn

Bronze Member
Joined
Apr 21, 2012
Messages
50
Location
Lafayette, TN
Tractor
Jinma 354
I changed the hydraulic fluid and filter on my 354; now the 3pt bounces. The arms drop a few inches and the bounce back up to their set position. Any ideas for a fix?

Your insight and experience are greatly appreciated.

JohnJ
 
   / Bouncing 3Point - Jinma 354 #2  
Have you run it through several full cycles to purge any air in the system? Be sure to recheck fluid level afterword also.

Note: The only way you'll get a full cycle is to remove any implement and force the arms all the way down.
 
   / Bouncing 3Point - Jinma 354
  • Thread Starter
#3  
Thanks. I'm fixing to climb on it in a minute. I'll give it some cycles.

Thanks again for the suggestion.
 
   / Bouncing 3Point - Jinma 354
  • Thread Starter
#4  
CCWKen,

Seems no amount of lift arm cycling, without or with implement, has solved the bouncing issue. Any thoughts as to what else might be causing the problem?
 

Tractor & Equipment Auctions

2015 Peterbilt 579 T/A Sleeper Cab Truck Tractor (A49461)
2015 Peterbilt 579...
2015 Ford Explorer AWD SUV (A48082)
2015 Ford Explorer...
2008 FORD F750 SUPER DUTY BUCKET UTILITY TRUCK (A50854)
2008 FORD F750...
2019 CATERPILLAR 299D2 XHP SKID STEER (A51242)
2019 CATERPILLAR...
2014 Ford Taurus Sedan (A50324)
2014 Ford Taurus...
2006 INTERNATIONAL 7600 T/A DUMP TRUCK (A51406)
2006 INTERNATIONAL...
 
Top