BOBCAT A300

[KERRTLE]

DOES ANYONE KNOW HOW TO RESET THE CHANGE OIL SERVICE LIGHT ON THE RIGHT HAND CONTROL PANEL (BESS). THANKS.

 

[KERRTLE]

OK maybe I need to try explaining a little more in detail. I just serviced our Bobcat A300 skidsteerer (all wheel steer) after completion of the service. When you start the machine a warning pops us saying that it needs to be serviced and to contact your local Bobcat dealer. I am able to get into all the codes and testing screen but am lost at how to clear this message. Or at least reset the service counter. Any help greatly appreciated.

 

[George2615]

You might send a PM to the administrator to move this thread to the Bobcat Construction Equipment thread. More Bobcat owners will see it there.

 

[KERRTLE]

Thanks George. I just figured it out too.

 

[KERRTLE]

Ok I figured out how to reset the service clock. Without turning the machine on, press the lights button once to turn on the panel. Then all you have to do is press and hold the HIGH FLOW and AUXILIARY PRESSURE RELEASE buttons simultaneously until the rest appears. Hope this helps someone. I was spinning in circles for a while for something so simple.

 

[brain55]

Ok I figured out how to reset the service clock. Without turning the machine on, press the lights button once to turn on the panel. Then all you have to do is press and hold the HIGH FLOW and AUXILIARY PRESSURE RELEASE buttons simultaneously until the rest appears. Hope this helps someone. I was spinning in circles for a while for something so simple.

That is good info to have. I haven't run into it yet, but I will at some point. The machines I have worked on are older and don't have that feature.

Thanks,
Brian