Bobcat 773G Hydraulic Issue

[schifference]

In preparation of expecting to use aux hydraulics I attempted to see if I turned them on and tried to activate them if they would appear to function. Machine boom and tilt was working as it was designed prior to me engaging auxiliary hydrauolics. Now boom and tilt do not work as designed and only work if Auxiliary hydraulics are activated in reverse. Please see video.
Any help/input is appreciated.
Thanks!

 

[laurencen]

when you tried the aux hydraulics did you have anything connected to the couplers?

 

[schifference]

no

 

[laurencen]

do you have anything you can attach, you could have dead head the spool and its stuck, not quite the same issue but if we run auxilary and not bleed wown its impossible to remove the quick connects, you could have pressure on the spool, stop motor, turn on ignition but not start motor, engage the aux circuit and move the switch back and forth, it may drain the pressure

 

[schifference]

Update. Presently I do not have an attachment to connect but please watch update and advise.
Thanks