Blow by

   / Blow by #2  
Blow by is when the ignighted fuel/air mixture in the cylinder "blows by" the piston rings and into the crankcase. You can tell by the smoke coming out of the crankcase vent. Hope this helps
 
   / Blow by #3  
Another way to tell is the oil residue at the engine crankcase vent. If it is a modern engine, you will find the oil fill cap "leaking" vapors. If it is real bad, I have seen it push oil out the dipstick tube.
 
   / Blow by #4  
Several addtional things to look for:

1. Crankcase oil that gets dirty very quickly.
2. Remove your oil filler cap with the engine running at low rpm and put your hand over the filler hole. You may be able to feel the puff-puff-puff at very low rpm.
3. When the engine is hot, remove the oil filler and put a sheet of paper or light cardboard near the filler. It will move with air puffing out. This may be hard to do/see if your fan is also close-by.
4. With severe blowby, you'll have oil and smoke coming out of any crankcase vent opening.
5. Do a compression check. All or some cylinders will show low compression. Spray some light oil in the cylinder at the sparkplug hole if it's a gas engine. You should see a big jump in compression with oil in the cylinder.
 
   / Blow by #5  
Blowby ?? isn't that when the politicians come by trying to get your vote ?
 
   / Blow by #6  

Tractor & Equipment Auctions

Year: 2018 Make: Ford Model: F-150 Vehicle Type: Pickup Truck Mileage: 184,501 Plate: Body Type: 4 (A51691)
Year: 2018 Make...
Tandem Axle Rear Truck Frame (A51692)
Tandem Axle Rear...
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
Impact Attenuator Guard Rail (A51692)
Impact Attenuator...
John Deere 443 4 Row Corn Head (A50774)
John Deere 443 4...
Unused 2025 CFG MX15RX Mini Excavator (A50322)
Unused 2025 CFG...
 
Top