TalonDancer
Gold Member
- Joined
- Jul 29, 2007
- Messages
- 388
Before I try to re-invent the wheel (again), I thought I'd check to see if anyone has come up with a clever idea for adjusting the engine speed while still in the BH90/BH75 operator's seat/area.
FWIW when using my BH90, every once in awhile I stop to think
I would like to drop the engine speed to idle, then rev her back up to get back to work. On the L39 that I rented this was easy. The hand throttle was on the right fender where it could be reached with the seat facing forward or reverse. But my GL3240's hand throttle is on the steering column requiring a contortionist to reach from the backhoe seating area.
Thanks in Advance - Talon Dancer
FWIW when using my BH90, every once in awhile I stop to think
I would like to drop the engine speed to idle, then rev her back up to get back to work. On the L39 that I rented this was easy. The hand throttle was on the right fender where it could be reached with the seat facing forward or reverse. But my GL3240's hand throttle is on the steering column requiring a contortionist to reach from the backhoe seating area.Thanks in Advance - Talon Dancer
