Backhoe Backhoe Control Valve

[sodamo]

Thanks Victor
Would add additional caution. Be mindful reinstalling the centering spring. I found out after control valve was reinstalled, plumbed and running. Dipper stick immediately went to full extension. Somehow managed to reverse the 2 parts at arrows.


Had to totally uninstall and correct. Fortunately it was the only one.

Once hooked back up, I put it thru all its motions then left running under pressure about 45 minutes and no leaks.

Tomorrow I hope to use to close in my gas line trench.

 

[sodamo]

Finally got to spend an hour plus using the backhoe. Works well.
Makes me more eager to mod the subframe to mount on my LS.

 

[JoelD]

Happy ending when you spend $20 in parts instead of replacing the unit for $1000. And now you have a cheap lifetime supply of spare o-rings. I still don’t understand why they used the white crap o- rings to begin with. All that matters is that you fixed it and now you can do your “ I fixed it” dance. Job well done.

 

[highpockets1]

I know this is old but maybe somebody will see it..if the valve is leaking from the top, is it serviceable from the top or has to be dropped from the bottom ?