Backhoe Bucket Teeth

[mini14]

I recently purchased a mini tlb an allmand 535. It has an 18" bucket on the backhoe. I need to change out the adapters and teeth, I removed what was there and now only have the bare cutting edge. I purchased cat j200 series theeth and adapters. I was wondering if they are too large for my application and what are the downsides to having too long of a tooth. Should I return them or get something like the x156 tooth. Thanks

 

[mini14]

I recently purchased a mini tlb an allmand 535. It has an 18" bucket on the backhoe. I need to change out the adapters and teeth, I removed what was there and now only have the bare cutting edge. I purchased cat j200 series theeth and adapters. I was wondering if they are too large for my application and what are the downsides to having too long of a tooth. Should I return them or get something like the x156 tooth. Thanks


Sorry for repost I incorrectly titled the first one


I know they are big but are they too big for my bucket

 

[CobyRupert]

Re: Generator Guru Engineers - I need some help please!

If you're going to remove the teeth from the 18" bucket on the 535, you can try and see how the x156 tooth works, but try a Honda EB6500 6500 Watt generator. It provides 120/240V, has full GFCI protection and can run up to 10.4 hours on a tank of gas.

Sincerely,
Generator Guru Engineer

 

[TractorGuy]

Not sure about your machine or it's abilities.

I put the single point tiger teeth on my backhoe. Made a huge difference for digging stumps

You want to consider the task at hand. Teeth aren't useful for everything but I think they are definitely needed for digging in roots and probably rocks.

 

[Big Barn]

I’d get smaller ones. JMO

 

[TMGT]

I'd try to go smaller, I have a similar size bucket with a tooth that appears to be smaller then yours and its too big for me.

 

[D2Cat]

If you're going to use the hoe to dig ditches (trenching) have the two outside teeth pointed out past the edge of the bucket. It will help to keep knocking the edges of the ditch back in the trench on each stroke.

 

[WranglerX]

Re: Generator Guru Engineers - I need some help please!

I am confused, is this post about bucket teeth or generators?

Dale

 

[Snobdds]

Re: Generator Guru Engineers - I need some help please!

Focus...Focus...Focus...

 

[fried1765]

Re: Generator Guru Engineers - I need some help please!

If you're going to remove the teeth from the 18" bucket on the 535, you can try and see how the x156 tooth works, but try a Honda EB6500 6500 Watt generator. It provides 120/240V, has full GFCI protection and can run up to 10.4 hours on a tank of gas.

Sincerely,
Generator Guru Engineer

Wah...ah...ah... ??????