B7610 and TSC Auger

   / B7610 and TSC Auger #1  

DennisArrow

Platinum Member
Joined
Jul 4, 2003
Messages
766
Location
Sugar Valley, Ga
Tractor
Iseki TL 2300, Kubota RTV, Kubota B7610
My new to me B7610 with less than 500 well maintained hours is quite the machine for me. Does everything I have needed it to do really well.........Moved 4 dump loads of crushed chert ore for fill, 5 loads of crusher run and spread it, maintains with blade 1/2 mile of gravel, bush hog and finish mower and on and on........Anyway, I have the need for a 3PH PHD, post hole digger, that TSC, Tractor Supply, is gonna have on sale in the next couple of weeks with 10% off. The question for folks who have used this combination or have knowledge of the subject is:

Will my 19 HP PTO drive a 9" or even a 12" auger in clay? Usually damp clay not packed like a rock

Will my 3PH arms raise high enough for this specific TSC PHD/Auger to work?

Thanks for the thoughts........God bless.......Dennis
 
   / B7610 and TSC Auger #2  
Yes no problem!


I have the b2920 with 21pto HP and it turns a 12" at just above idle.

What you need to watch for is lift height in relation to your tractor. Ie; make sure to get a subcompact or compact phd

Hope this helps
 
   / B7610 and TSC Auger
  • Thread Starter
#3  
Thanks ericher.............Good to KNOW that 21 HP will do the job so well. That totally reassures me that the power will be there. NOW to figure out if the arms will allow the PHD to go high enough. I called Speeco, the manufacturer of many implements for TSC and asked an engineer about the arms subject. Was truly funny as he had no idea if it would work and advised it was a "trial and error" process for fitment. He did assure me that the model that TSC markets is made for Sub and Compact tractors..........

Sure would love to hear from folks on here that have experienced this problem........God bless.....Dennis
 
   / B7610 and TSC Auger #4  
I was facing a similar problem with my B7610, so I bought something to make sure the PHD would be high enough off the ground - an M4700. :)
 
   / B7610 and TSC Auger #5  
We've got the experience and the PHD that you're looking for!!
Our Everything Attachments Compact Post Hole Digger is made just for subcompact and small compact tractors like the BX and B Kubotas. They have a taller hoop and longer boom so you will have enough lift height. Also, they use a 48" long auger with a 2" shaft. Our post hole diggers ship free to your home within 1,000 miles of Newton, NC via UPS or Fed-Ex ground. If you're outside of our free shipping zone, shipping is generally very reasonable.
 
   / B7610 and TSC Auger #6  
We've got the experience and the PHD that you're looking for!!
Our Everything Attachments Compact Post Hole Digger is made just for subcompact and small compact tractors like the BX and B Kubotas. They have a taller hoop and longer boom so you will have enough lift height. Also, they use a 48" long auger with a 2" shaft. Our post hole diggers ship free to your home within 1,000 miles of Newton, NC via UPS or Fed-Ex ground. If you're outside of our free shipping zone, shipping is generally very reasonable.

I have an EA Box Scraper, Pallet Forks and Root Grapple. All of excellent quality and work well. I'll will be buying a Post Hole Digger from them this spring. The stuff I bought from TS has ended up being returned when it broke. Just my 2 cents.
 

Tractor & Equipment Auctions

2014 UTILITY 53FT DRY VAN TRAILER (A51222)
2014 UTILITY 53FT...
2006 INTERNATIONAL 7600 T/A DUMP TRUCK (A51406)
2006 INTERNATIONAL...
2014 Therm Dynamics TD400 Towable Flameless Heater Trailer (A49461)
2014 Therm...
2017 RAM PROMASTER 2500 CARGO VAN (A51222)
2017 RAM PROMASTER...
2000 PETERBILT 357 6X6 DAY CAB ROAD TRACTOR (A51406)
2000 PETERBILT 357...
(INOP) 2005 JCB 506C TELESCOPIC FORKLIFT (A50459)
(INOP) 2005 JCB...
 
Top