B7510 won't start?

PSDStu · Aug 18, 2006

I just completed working about 2 hours on the tractor and when I was done I shut it down and hosed it off.

When I went to start it back up...... nothing..... glow plug light, battery, and oil light all come on, but when you go to crank it over nothing.....dead silent.

I checked the seat switch and it's making contact and checked fuses and all seemed ok.

Any ideas before I call the dealer?

higgy · Aug 18, 2006

nutral saftey switch,

in/out of gear that is normal for starting,
PTO in the engauged position
Range selector not in proper place

any other lever or switch that should be in a perscribed postion for starting not in the correct place.

Dane

Rusty · Aug 18, 2006

My B7500 has a kill knob that is pulled to stop the engine. If your B7510 has the same knob, is it still pulled out?

Charliebrn · Aug 18, 2006

I'd also clean the battery connections. Seen that a couple times here on the board...

PSDStu · Aug 19, 2006

higgy said:
nutral saftey switch,

in/out of gear that is normal for starting,
PTO in the engauged position
Range selector not in proper place

any other lever or switch that should be in a perscribed postion for starting not in the correct place.

Dane

Bingo! The PTO lever was in the engaged position..... duh... I guess I must have bumped it while I was washing off the tractor.

Thanks Dane!