B3030 Rear Tire Pressure

[Kubota 2007]

B3030 with R-4 Loaded with windsheild Wash I was told to put so much air in, but I forgot, I checked and I have 9lbs in each when the valve stem is at 12:00, Tires seem to be squating so I put it up to 15 psi with back hoe installed. Any idea what the pressure should be?

 

[kjung17]

Funny thing about tractor tires. Due to the many different applications, you will rarely find a list of tire pressures. You are on the right track. Adjust your pressure so that your tires look right and perform properly. When you remove your backhoe, you may want to reduce the pressure.

 

[art]

They should be flat across the tread surface when properly inflated. probably about the original amount.

 

[ruralruss]

B3030 with R-4 Loaded with windsheild Wash I was told to put so much air in, but I forgot, I checked and I have 9lbs in each when the valve stem is at 12:00, Tires seem to be squating so I put it up to 15 psi with back hoe installed. Any idea what the pressure should be?

I run my B3200 loaded rears at 14. No backhoe but I usually have the box scrape on.

 

[ronjhall]

My owners manual for a B2910 shows R-4 tires should be inflated to 20 psi with or without ballast.

 

[High Compression]

I have the turf tires on my B3030 loaded with Rimguard. The sidewall of my tires say 35psi. I notice if I run much less than that, the tractor gets squirrely and less stable side to side.