B2910 Draw Bar Attachment ??

PowerMax · Nov 12, 2004

Is there a device made that holds the draw bar in place (not allowing it to spin or turn) so that you can pull a trailer around. I think something could be made (2 pieces of flat bar), but I'm not sure where it would attach to the lower 3-point arms. No sense in re-inventing the wheel. Thanks.

Jeff

equipman · Nov 12, 2004

PowerMax
We carry the 'draw bar lock' in our parts department. I believe they are available from TISCO or BECKNELL. Hope this helps.
Lewis

Inspector507 · Nov 12, 2004

Here is one style

I got mine on ebay, might check there. But keep in mind, it will NOT work on all lift arms.

shoppintractors · Nov 12, 2004

Here's one from Bad River. It attaches from the draw bar to the top link.

http://www.badriverinc.com/prod02.htm

Note the attached chain for safety purposes.

Don

BubbaJr · Nov 12, 2004

TSC sells one, but it is not compatible with the extendable arms on the B2910. The mechanism for releasing the arms gets in the way of attaching the draw bar lock to the arms. If you have a way to make them, that would probably be the easiest. If you find something that will work with the 2910's design, please let us know.

GOOD LUCK /forums/images/graemlins/smile.gif